|
| Big, fluffy bodybuilder quads might be all well and good if you're into getting all oiled up and "competing" in posing trunks, but the fact of the matter is that the quadriceps take a back seat to the posterior chain (hip and lumbar extensors) when it comes to athletic performance. Compared to the quads, the glutes and hamstrings are more powerful muscles with a higher proportion of fast-twitch fibers. Nonetheless, I'm constantly amazed at how many coaches and athletes fail to tap into this strength and power potential; they seem perfectly content with just banging away with quad-dominant squats, all the while reinforcing muscular imbalances at both the knee and hip joints.
The muscles of the posterior chain are not only capable of significantly improving an athlete's performance, but also of decelerating knee and hip flexion. You mustn't look any further than a coaches' athletes' history of hamstring and hip flexor strains, non-contact knee injuries, and chronic lower back pain to recognize that he probably doesn't appreciate the value of posterior chain training. Or, he may appreciate it, but have no idea how to integrate it optimally.
The best remedies for this problem are deadlift variations, Olympic lifts, good mornings, glute-ham raises, pull-throughs, back extensions, and hip-dominant lunges and step-ups. Some quad work is still important, as these muscles aren't completely "all show and no go," but considering most athletes are quad-dominant in the first place, you can usually devote at least 75% of your lower body training to the aforementioned exercises (including Olympic lifts and single-leg work, which have appreciable overlap).
Regarding the optimal integration of posterior chain work, I'm referring to the fact that many athletes have altered firing patterns within the posterior chain due to lower crossed syndrome. In this scenario, the hip flexors are overactive and therefore reciprocally inhibit the gluteus maximus. Without contribution of the gluteus maximus to hip extension, the hamstrings and lumbar erector spinae muscles must work overtime (synergistic dominance). There is marked anterior tilt of the pelvis and an accentuated lordotic curve at the lumbar spine.
Moreover, the rectus abdominus is inhibited by the overactive erector spinae. With the gluteus maximus and rectus abdominus both at a mechanical disadvantage, one cannot optimally posteriorly tilt the pelvis (important to the completion of hip extension), so there is lumbar extension to compensate for a lack of complete hip extension. You can see this quite commonly in those who hit sticking points in their deadlifts at lockout and simply lean back to lock out the weight instead of pushing the hips forward simultaneously. Rather than firing in the order hams-glutes- contralateral erectors-ipsilateral erectors, athletes will simply jump right over the glutes in cases of lower crossed syndrome. Corrective strategies should focus on glute activation, rectus abdominus strengthening, and flexibility work for the hip flexors, hamstrings, and adductors.
Eric Cressey
www.BuildingtheEfficientAthlete.com |
| Read more |
|
| I group these two together simply because they are intimately related in terms of shoulder health and performance.
Although each of the four muscles of the rotator cuff contributes to humeral motion, their primary function is stabilization of the humeral head in the glenoid fossa of the scapula during this humeral motion. Ligaments provide the static restraints to excessive movement, while the rotator cuff provides the dynamic restraint. It's important to note, however, that even if your rotator cuff is completely healthy and functioning optimally, you may experience scapular dyskinesis, shoulder, upper back, and neck problems because of inadequate strength and poor tonus of the muscles that stabilize the scapula. After all, how can the rotator cuff be effective at stabilizing the humeral head when its foundation (the scapula) isn't stable itself? Therefore, if you're looking to eliminate weak links at the shoulder girdle, your best bet is to perform both rotator cuff and scapular stabilizer specific work.
In my experience, the ideal means of ensuring long-term rotator cuff health is to incorporate two external rotation movements per week to strengthen the infraspinatus and teres minor (and the posterior deltoid, another external rotator that isn't a part of the rotator cuff). On one movement, the humerus should be abducted (e.g. elbow supported DB external rotations, Cuban presses) and on the other, the humerus should be adducted (e.g. low pulley external rotations, side-lying external rotations). Granted, these movements are quite basic, but they'll do the job if injury prevention is all you seek. Then again, I like to integrate the movements into more complex schemes (some of which are based on PNF patterns) to keep things interesting and get a little more sport-specific by involving more of the kinetic chain (i.e. leg, hip, and trunk movement).
On this front, reverse cable crossovers (single-arm, usually) and dumbbell swings are good choices. Lastly, for some individuals, direct internal rotation training for the subscapularis is warranted, as it's a commonly injured muscle in bench press fanatics. Over time, the subscapularis will often become dormant – and therefore less effective as a stabilizer of the humeral head - due to all the abuse it takes.
For the scapular stabilizers, most individuals fall into the classic anteriorly tilted, winged scapulae posture (hunchback); this is commonly seen with the rounded shoulders that result from having tight internal rotators and weak external rotators. To correct the hunchback look, you need to do extra work for the scapular retractors and depressors; good choices include horizontal pulling variations (especially seated rows) and prone middle and lower trap raises. The serratus anterior is also a very important muscle in facilitating scapular posterior tilt, a must for healthy overhead humeral activity. Supine and standing single-arm dumbbell protractions are good bets for dynamically training this small yet important muscle; scap pushups, scap dips, and scap pullups in which the athlete is instructed to keep the scapulae tight to the rib cage are effective isometric challenges to the serratus anterior.
Concurrently, athletes with the classic postural problems should focus on loosening up the levator scapulae, upper traps, pecs, lats, and anterior delts. One must also consider if these postural distortions are compensatory for kinetic chain dysfunction at the lumbar spine, pelvis, or lower extremities. My colleague Mike Robertson and I have written extensively on this topic. Keep in mind that all of this advice won't make a bit of difference if you have terrible posture throughout the day, so pay as much attention to what you do outside the weight room as you do to what goes on inside it.
Eric Cressey
www.BuildingtheEfficientAthlete.com
Click here to purchase the most comprehensive shoulder resource available today: Optimal Shoulder Performance - From Rehabilitation to High Performance. |
| Read more |
|
| These discrepancies are highly prevalent in sports where athletes are repetitively utilizing musculature on one side but not on the contralateral side; obvious examples include throwing and kicking sports, but you might even be surprised to find these issues in seemingly "symmetrical" sports such as swimming (breathing on one side only) and powerlifting (not varying the pronated/supinated positions when using an alternate grip on deadlifts). Obviously, excessive reliance on a single movement without any attention to the counter-movement is a significant predisposition to strength discrepancies and, in turn, injuries.
While it's not a great idea from an efficiency or motor learning standpoint to attempt to exactly oppose the movement in question (e.g. having a pitcher throw with his non-dominant arm), coaches can make specific programming adjustments based on their knowledge of sport-specific biomechanics. For instance, in the aforementioned baseball pitcher example, one would be wise to implement extra work for the non-throwing arm as well as additional volume on single-leg exercises where the regular plant-leg is the limb doing the excursion (i.e. right-handed pitchers who normally land on their left foot would be lunging onto their right foot). Obviously, these modifications are just the tip of the iceberg, but simply watching the motion and "thinking in reverse" with your programming can do wonders for athletes with unilateral discrepancies.
Eric Cressey
www.BuildingtheEfficientAthlete.com |
| Read more |
|
| Grip strength encompasses pinch, crushing, and supportive grip and, to some extent, wrist strength; each sport will have its own unique gripping demands. It's important to assess these needs before randomly prescribing grip-specific exercises, as there's very little overlap among the three types of grip. For instance, as a powerlifter, I have significantly developed my crushing and supportive grip not only for deadlifts, but also for some favorable effects on my squat and bench press. Conversely, I rarely train my pinch grip, as it's not all that important to the demands on my sport. A strong grip is the key to transferring power from the lower body, core, torso, and limbs to implements such as rackets and hockey sticks, as well as grappling maneuvers and holds in mixed martial arts.
The beauty of grip training is that it allows you to improve performance while having a lot of fun; training the grip lends itself nicely to non-traditional, improvisational exercises. Score some raw materials from a Home Depot, construction site, junkyard, or quarry, and you've got dozens of exercises with hundreds of variations to improve the three realms of grip strength. Three outstanding resources for grip training information are Mastery of Hand Strength by John Brookfield, Grip Training for Strength and Power Sports by accomplished Strongman John Sullivan, and www.DieselCrew.com.
Eric Cressey
www.BuildingtheEfficientAthlete.com |
| Read more |
|
LEARN
HOW TO
DEADLIFT
- Avoid the most common deadlifting mistakes
- 9 - minute instructional video
- 3 part follow up series
|
